Development of Rebunching Cavities at IAP

A focus of work at IAP has been the development and optimization of spiral loaded cavities since the 1970s [A. Schempp et al, NIM 135, 409 (1976)]. These cavities feature a high efficiency, a compact design and a big variety of possible fields of application. They find use both as bunchers and post accelerators to vary the final energy of the beam. In comparison to other available designs, the advantage of these structures lies in their small size. Furthermore they can easily be tuned to the required resonance frequency by varying the length of the spiral. Due to the small size of the cavities the required budget can also be kept low. Here, two slightly different types of spiral loaded cavities, which were built for the REX-ISOLDE project at CERN and the intensity upgrade program at GSI are being discussed.Comment: 4 pages, 9 figures PRST-AB special LINAC 2000 edition with additional information in comparison to the 3 pages LINAC paper physics/000708

Efficiency of tunable band-gap structures for single-photon emission

The efficiency of recently proposed single-photon emitting sources based on tunable planar band-gap structures is examined. The analysis is based on the study of the total and ``radiative'' decay rates, the expectation value of emitted radiation energy and its collimating cone. It is shown that the scheme operating in the frequency range near the defect resonance of a defect band-gap structure is more efficient than the one operating near the band edge of a perfect band-gap structure.Comment: 9 pages, 7 figure

An epep collider based on proton-driven plasma wakefield acceleration

Recent simulations have shown that a high-energy proton bunch can excite strong plasma wakefields and accelerate a bunch of electrons to the energy frontier in a single stage of acceleration. This scheme could lead to a future $ep$ collider using the LHC for the proton beam and a compact electron accelerator of length 170 m, producing electrons of energy up to 100 GeV. The parameters of such a collider are discussed as well as conceptual layouts within the CERN accelerator complex. The physics of plasma wakefield acceleration will also be introduced, with the AWAKE experiment, a proof of principle demonstration of proton-driven plasma wakefield acceleration, briefly reviewed, as well as the physics possibilities of such an $ep$ collider.Comment: 6 pages, 2 figures, to appear in the proceedings of the DIS 2014 Workshop, 28 April - 2 May, Warsaw, Polan

Collider design issues based on proton-driven plasma wakefield acceleration

Recent simulations have shown that a high-energy proton bunch can excite strong plasma wakefields and accelerate a bunch of electrons to the energy frontier in a single stage of acceleration. It therefore paves the way towards a compact future collider design using the proton beams from existing high-energy proton machines, e.g. Tevatron or the LHC. This paper addresses some key issues in designing a compact electron-positron linear collider and an electron-proton collider based on existing CERN accelerator infrastructure

RF Characterization of Superconducting Samples

At CERN a compact Quadrupole Resonator has been re-commissioned for the RF characterization of superconducting materials at 400 MHz. In addition the resonator can also be excited at multiple integers of this frequency. Besides Rs it enables determination of the maximum RF magnetic field, the thermal conductivity and the penetration depth of the attached samples, at different temperatures. The features of the resonator will be compared with those of similar RF devices and first results will be presented

Solar Magnetic Tracking. I. Software Comparison and Recommended Practices

Feature tracking and recognition are increasingly common tools for data analysis, but are typically implemented on an ad-hoc basis by individual research groups, limiting the usefulness of derived results when selection effects and algorithmic differences are not controlled. Specific results that are affected include the solar magnetic turnover time, the distributions of sizes, strengths, and lifetimes of magnetic features, and the physics of both small scale flux emergence and the small-scale dynamo. In this paper, we present the results of a detailed comparison between four tracking codes applied to a single set of data from SOHO/MDI, describe the interplay between desired tracking behavior and parameterization of tracking algorithms, and make recommendations for feature selection and tracking practice in future work.Comment: In press for Astrophys. J. 200

Investigations of OTR screen surfaces and shapes

Optical transition radiation (OTR) has proven to be a flexible and effective tool for measuring a wide range of beam parameters, in particular the beam divergence and the transverse beam profile. It is today an established and widely used diagnostic method providing linear real-time measurements. Measurements in the CLIC Test Facility (CTF3) showed that the performance of the present profile monitors is limited by the optical acceptance of the imaging system. In this paper, two methods to improve the systems' performance are presented and results from measurements are shown. First, the influence of the surface quality of the OTR screen itself is addressed. Several possible screen materials have been tested to which different surface treatment techniques were applied. Results from the measured optical characteristics are given. Second, a parabolic-shaped screen support was investigated with the aim of providing an initial focusing of the emitted radiation and thus to reduce the problem of aperture limitation

Low Power Measurements on a Finger Drift Tube Linac

The efficiency of RFQs decreases at particle energies higher than a few MeV/u and thus typically DTL structures are used in this energy region. However, the rf field in the gap always has a defocusing influence on the beam. In order to compensate this effect, fingers with quadrupole symmetry were added to the drift tubes, the focusing fingers do not need an additional power source or feed through. Beam dynamics have been studied with the code RFQSIM. Detailed analysis of the field distribution was done and the geometry of the finger array has been optimized with respect to beam dynamics. A prototype cavity with finger drift tubes was built and low power measurements were done. In this contribution, the results of the rf simulation with Microwave Studio are compared to bead perturbation measurements and the focusing effect on the beam is discussed

Extension of the Measurement Capabilities of the Quadrupole Resonator

The Quadrupole Resonator, designed to measure the surface resistance of superconducting samples at 400 MHz has been refurbished. The accuracy of its RF-DC compensation measurement technique is tested by an independent method. It is shown that the device enables also measurements at 800 and 1200 MHz and is capable to probe the critical RF magnetic field. The electric and magnetic field configuration of the Quadrupole Resonator are dependent on the excited mode. It is shown how this can be used to distinguish between electric and magnetic losses.Comment: 6 pages, g figure